1 | | Diaphragm expansion vessel | | |
2 | | Connection line; diaphragm expansion vessel | | |
3 | | Cap panel with gasket | | |
4 | | Profiled seal | | |
5 | | Boiler flue connection | | |
6 | | Plug | | |
7 | | Ventilation air gasket | | |
8 | | Flue gas gasket | | |
10 | | Heat exchanger | | |
11 | | Moulded hose, return | | |
12 | | Condensate hose | | |
13 | | Siphon | | |
15 | | Hose (600 mm long) | | |
16 | | Condensate hose (400 mm long) | | |
17 | | Hose (270 mm long) | | |
19 | | Tee | | |
21 | | Safety valve | | |
23 | | Hose ferrule | | |
24 | | Right-angle shut-off valve, DHW cylinder heating | | |
25 | | Connection line, DHW heating | | |
26 | | Bezel | | |
27 | | Non-return valve | | |
28 | | Air vent valve G ?" | | |
29 | | Pressure gauge | | |
30 | | Right-angle shut-off valve, cylinder cold water | | |
31 | | Gas pipe | | |
32 | | Flow pipe | | |
33 | | Connection pipe, cold water, cylinder | | |
34 | | Heating water flow connection pipe | | |
35 | | Connection pipework, heating water return | | |
36 | | Connection pipework, cold water | | |
37 | | DHW connection pipe | | |
38 | | Heating water flow connection pipe | | |
39 | | Cold water connection | | |
40 | | Return connection pipe | | |
50 | | Flow unit | | |
51 | | Return unit | | |
52 | | Overflow valve | | |
53 | | Plug Ø 8/10 | | |
54 | | Plate-type heat exchanger | | |
55 | | Profiled gasket | | |
56 | | Valve insert | | |
57 | | Overflow pipe | | |
62 | | Burner gauze assembly | | |
63 | | Burner gauze assembly gasket | | |
66 | | Gasket burner flange | | |
66 | | Mixture damper | | |
67 | | Fan | | |
68 | | Gas train | | |
69 | | Burner door | | |
70 | | Ignition unit | | |
71 | | Ionisation electrode gasket | | |
72 | | Ignition electrode gasket | | |
74 | | Gas nozzle | | |
75 | | Venturi extension | | |
80 | | Gasket set A 16 x 24 x 2.0 | | |
81 | | Gasket set A 17 x 24 x 2.0 | | |
82 | | Gasket set A 10 x 15 x 1.5 | | |
84 | | Gasket 23 x 30 x 2.0 | | |
85 | | O-ring gasket set 17.86 x 2.62 | | |
87 | | O-ring 14.3 x 2.4 | | |
88 | | O-ring 35.4 x 3.6 | | |
89 | | Set of plug connector retainers | | |
90 | | Toggle fastener (set) | | |
92 | | Grommet | | |
93 | | Pipe clip Ø 18 | | |
94 | | Pipe clip Ø 18/1.5 | | |
95 | | Hose clip DN 25 | | |
96 | | Clip Ø 8 | | |
97 | | Clip Ø 10 | | |
98 | | Clip Ø 15 | | |
99 | | Clip Ø 18 | | |
100 | | Hose clip Ø 34.3-38.7 | | |
101 | | Worm-drive hose clip Ø 34.0 -37.4 | | |
102 | | Locking clip, condensate drain | | |
103 | | Drain plug (set) | | |
104 | | Cap | | |
105 | | Hose Ø 10 x 1.5 x 750 | | |
106 | | Union nut G 1" | | |
110 | | Quick-acting air vent valve | | |
111 | | Cylinder mounting bracket | | |
112 | | Control unit support | | |
130 | | Circulation pump | | |
131 | | Circulation pump | | |
133 | | Circulation pump motor | | |
134 | | Circulation pump motor | | |
140 | | Flue gas temperature sensor | | |
141 | | Thermocouple | | |
142 | | Temperature sensor | | |
143 | | Cylinder temperature sensor | | |
150 | | T&P valve connection pipe | | |
151 | | T&P valve | | |
160 | | Cylinder | | |
162 | | Sleeve | | |
163 | | Strain relief | | |
164 | | Cylinder gasket | | |
166 | | Anode flange with gasket | | |
167 | | Flange insulation | | |
171 | | Sleeve | | |
172 | | Lid | | |
200 | | Side panel, left | | |
202 | | Side panel, right | | |
204 | | Top cover | | |
205 | | Front panel, top | | |
206 | | Bottom front panel | | |
207 | | Adjustable foot | | |
208 | | Fixing elements | | |
300 | | Control unit | | |
301 | | Casing back panel | | |
302 | | Boiler coding card | | |
303 | | Fuse 6.3 A slow (10 pce.) | | |
304 | | Fuse holder | | |
305 | | Programming unit for weather compensated mode | | |
306 | | Programming unit for constant temperature mode | | |
307 | | LON communication module (accessories) | | |
308 | | PCB adaptor, LON module (accessories) | | |
309 | | Internal extension H1 | | |
315 | | Locking bolts, left and right | | |
316 | | Slider, left and right | | |
60 | | Burner gasket | | |
61 | | Insulation ring | | |
64 | | Ignition electrode with gasket | | |
65 | | Ionisation electrode with gasket | | |
165 | | Magnesium anode | | |
108 | | Special grease | | |
209 | | Touch-up paint stick, Vitowhite | | |
210 | | Spray paint, Vitowhite | | |
310 | | Cable harness X8/X9/Ionisation | | |
311 | | Cable harness 100/35/54 (auxiliary earth) | | |
312 | | Cable harness stepper motor | | |
313 | | Mating plug | | |
314 | | Cable fixing | | |
400 | | Operating instructions for constant temperature mode | | |
401 | | Operating instructions for weather compensated mode | | |
402 | | Installation and service instructions | | |