| 6 | | Burner (with item 007, 009 to 019, 021, 022, 023 and 046) | | |
| 7 | | Burner gauze assembly | | |
| 8 | | Electronic box radial fan | | |
| 9 | | Radial fan | | |
| 12 | | Gas pipe (incl. gaskets) | | |
| 13 | | Conversion kit for natural gas E (gas restrictor) | | |
| 14 | | Conversion kit for natural gas LL (gas restrictor) | | |
| 15 | | Conversion kit for LPG (gas restrictor) | | |
| 16 | | Gas train | | |
| 17 | | Ignition unit | | |
| 18 | | Gas pipe | | |
| 19 | | Burner insulating ring | | |
| 21 | | Burner gauze assembly gasket, large | | |
| 22 | | Burner profile packing | | |
| 23 | | Burner gauze assembly gasket | | |
| 24 | | Heat exchanger | | |
| 25 | | Boiler adaptor | | |
| 26 | | Lip seal Ø 150 | | |
| 27 | | Lip seal Ø 100 | | |
| 28 | | Plug | | |
| 29 | | Quick-acting air vent valve | | |
| 30 | | Grommet | | |
| 31 | | Flow switch | | |
| 32 | | Diaphragm safety valve | | |
| 33 | | Siphon | | |
| 34 | | Condensate hose | | |
| 35 | | Ball valve | | |
| 36 | | Return pipe extension | | |
| 37 | | Sealing panel | | |
| 38 | | Edge protector | | |
| 39 | | Front panel | | |
| 42 | | Wall mounting fixture | | |
| 44 | | Pressure gauge and fem. Connection | | |
| 46 | | Differential pressure sensor | | |
| 47 | | Grommet | | |
| 48 | | Safety springs | | |
| 49 | | Thermocouple | | |
| 50 | | Temperature sensor | | |
| 52 | | Expansion vessel connection | | |
| 54 | | Locking bracket | | |
| 55 | | Gravity brake | | |
| 56 | | Flue gas temperature sensor | | |
| 57 | | Vitodens control unit | | |
| 58 | | Rear cover | | |
| 59 | | Support | | |
| 60 | | Damper | | |
| 61 | | Pressure gauge retainer | | |
| 62 | | Clip | | |
| 63 | | Hinge | | |
| 64 | | Coding card | | |
| 65 | | Fuse | | |
| 66 | | Operating interface for constant temperature operation | | |
| 67 | | Operating interface for weather compensated operation | | |
| 69 | | Outside temperature sensor | | |
| 90 | | Micro switch | | |
| 10 | | Ignition electrode | | |
| 11 | | Ionisation electrode | | |
| 1 | | Operating instructions for constant temperature operation | | |
| 2 | | Operating instructions for weather-compensated operation | | |
| 3 | | Service instructions | | |
| 5 | | Installation instructions | | |
| 20 | | Set of small burner parts | | |
| 40 | | Touch-up spray paint, Vitowhite | | |
| 41 | | Touch-up paint stick, Vitowhite | | |
| 45 | | Special grease | | |
| 51 | | Gasket set | | |
| 53 | | Heat conducting paste | | |
| 70 | | Access guard | | |
| 74 | | Test adaptor ionisation current test | | |
| 75 | | Cable harness X8/X9 | | |
| 76 | | Mains cable - motor electronics | | |
| 77 | | Connecting cable - motor | | |
| 78 | | Internal ionisation lead | | |
| 79 | | Cable harness aux. earth/54/35 | | |
| 80 | | Cable harness ionisation/KM BUS | | |
